Product Setup - D-Link DHP-W312AV Guía De Instalación Rápida

PRODUCT SETUP

HARDWARE INSTALLATION AND CONNECTION
Pre-existing Powerline
device
ROOM A (Not included)
Internet Router
ROOM B
DHP-W312AV
Note: Network connectivity is confi rmed when the Powerline LEDs indicators on both Powerline
devices are steadily lit. This will indicate that your network is now secure.
USING THE SETUP WIZARD
Step 1:
To access the confi guration utility, open a web browser such as Internet Explorer and either enter the
address written on the Wi-Fi Confi guration Card or one of the following in the address fi eld:
http://dlinkap.local. or http://192.168.0.50
Step 2:
By default, Admin will be the User Name. Leave the password blank.
DHP-W312AV
Step 1:
Ensure that an existing Powerline product has been
connected to your router and setup completed.
Step 2:
Plug the DHP-W312AV into a wall outlet where you want
to extend your network and connect it to a computer via
Ethernet cable (for the setup wizard).
Step 3:
Press the Simple Connect button on the existing Powerline
AV device for 3 seconds. Then, within two minutes, press
the WPS (Simple Connect) button on the DHP-W312AV
for 3 seconds. The Powerline devices will then reboot.
3