Setting The Clock; Setting The Clock Manually; Setting The Clock Automatically; Display He Clock - Hitachi AXM649BT Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 112

Setting the Clock

 Setting the Clock Manually
1. Set the unit in eco power standby mode.
2. Press and hold the Clock button (
begins to blink.
3. Set the hour with the Volume Up/Down button (
4. Press the Clock button (
5. Set the minute with the Volume Up/Down button (
6. Press the Clock button (
Note:
• When the clock setting time for each step is longer, the clock setting mode will be cancelled.
• If a power failure occurs or the unit is disconnected from the mains, the clock setting will be lost.
 Setting the Clock Automatically
Tune into a RDS station and wait for few minutes. To confirm, press the Clock button (
 Display the Clock
In standby mode, press the Clock button (

Sound Quality

Adjusting the Volume

To increase or decrease the volume, rotate the Volume Control knob (
press the Volume Up/Down buttons (

Adjusting the Super Bass

You can reinforce the bass sound to maintain rich, full bass at low volume.
Press the Super Bass button (
on the front panel. Press the Super Bass button (

Adjusting the Bass

Rotate the BASS knob clockwise or counter clockwise on the Amplifier to adjust the intensity of the
bass output sound.

Adjusting the Treble

Rotate the TREBLE knob clockwise or counter clockwise on the Amplifier to adjust the intensity of
the treble output sound.

Controlling the Loudness

This unit has a loudness function, which can automatically increase the bass sound effect at low
volume. It can also increase the bass sound effect at high volume, but it will be relatively less when
it is at high volume. Press the Loudness button (
loudness function, the icon "

Presetting Equalizer

You can adjust the sound reproduced simply by choosing from 5 preset equalizers. Press the Pre-
set Equalizer button (

Changing the Front Panel Darkness

This unit has three brightness levels for you to adjust the clock display. Press the Dimmer Control
button (
) on the front panel or the remote control repeatedly to choose the desired brightness.
D M
01_AXM649BT_GB_P41013409-A101_20 Mar 13.indd 15
), the VFD will display CLOCK SET and CLOCK 24
CLOCK
), the minute indicator will blink.
CLOCK
), the built-in clock starts operating.
CLOCK
CLOCK
) on the remote control.
VOL +/-
) on the remote control to get the effect, the word "DBB" will lit
S-BASS
" will display on the front panel, press again will disappear.
) repeatedly to scroll through the following options:
P-EQ
FLAT
POP
JAZZ
) or Previous/Next buttons (
VOL+/-
) or Previous/Next buttons (
VOL+/-
).
) again to cancel the effect.
S-BASS
) on the remote control to obtain the
LOUDNESS
ROCK
CLASSIC
GB-15
/
).
H
G
/
).
H
G
).
CLOCK
) on the unit or
- VOLUME +
2013-3-20 9:44:05

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido