Operation; Before Initial Use - Waeco MyFridge MF-1W Instrucciones De Uso

Ocultar thumbs Ver también para MyFridge MF-1W:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
_MF-1W.book Seite 16 Freitag, 3. November 2006 4:18 16

Operation

Connected to a 12 V plug socket (e. g. cigarette lighter) with the 12 V
connection cable
With the integrated rechargeable battery pack. Depending on the battery
charge, MyFridge MF-1W can keep pre-cooled drinks cold for between
one and two hours.
If the device is not cooling in charge mode, you can charge the battery pack
in the device.
Its cooling system is a non-wearing and CFC-free Peltier cooling, the heat is
discharged by a fan.
MyFridge MF-1W has the following operating elements:
No. in 2,
Explanation
page 3
1
Charge display (red = charge, green = completely charged)
2
Function switch
3
Electrical power connection
5
"TEMP-" button: decreases the desired cooling temperature
by 1 °C.
6
"POWER" button: switches the cooling on and off.
7
"TEMP+" button: increases the desired cooling temperature
by 1 °C.
8
Display
6
Operation
If the device malfunctions (e.g. due to electrostatic discharge)
you only need to press a function button for the device to function
normally again.
6.1

Before initial use

Before starting your new device for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the the "Cleaning and maintenance" chapter
on page 19).
➤ Insert the rechargeable battery pack, if necessary. (See the "Inserting/
replacing the rechargeable battery pack" chapter on page 17.)
➤ Charge the battery pack as described in the "Charging the battery pack"
chapter on page 18.
16
MF-1W

Publicidad

Tabla de contenido
loading

Tabla de contenido