Useful Tips; Only For Sales Within The European Union (Eu) - Indel B FM7 Instrucciones De Uso

ENGLISH
MAINTENANCE
Attention
Cut power off before performing any operation on the device.
CLEANING
• Clean the device inside and outside with warm water and neutral detergent at regular intervals.
• After washing, rinse with clear water and dry with a soft cloth.
• Do not use: specific products for glass and mirrors; liquid, powder or spray detergents; solvents;
alcohol; ammonia or abrasive products.
• When the device is not used, dry the inside and leave the door partially open to ensure ventilation.
• After it has been used for a long time, make sure dust does not obstruct the ventilation grilles.
• Keep the door seal free from mold and oil. Regularly make sure that no signs of aging are present, so
as to avoid poor sealing efficiency.
• Clean the condensator at least once a year.

USEFUL TIPS

If the device fails to operate or operation is irregular, before contacting one of our After-Sales Service
Centers, make sure that:
• power supply is provided
• voltage corresponds to the value indicated in the plate
• connections and polarity are appropriate
• the device is not placed close to a heat source
• the fuse of the supply line is not interrupted.
Attention
Only skilled personnel, or personnel belonging to an After-Sales Service Center approved by the
Manufacturer, must replace the power supply cable.
Indel B shall not be held responsible for the failure to comply with all the regulations indicated in
this manual.

ONLY FOR SALES WITHIN THE EUROPEAN UNION (EU)

This equipment is marked in compliance with European Directive 2012/19/EU (WEEE). The symbol on the
product indicates that it must not be treated as domestic waste.
Ensure this product is not treated as urban waste but as professional WEEE waste.
20
FM7
FM7_24-11-2016