Attachments - Kenmore 116.31200 Manual De Uso Y Cuidado

CAUTION
DO NOT use the hose when the vacuum
cleaner is in the use position.
Always return the vacuum cleaner to the
upright position before using the hose
and attachments.
TO USE ATTACHMENTS
1. Place the vacuum cleaner in the upright
lock position.
2. Remove the hose and wand by removing
hose from hose holder and lifting up.
3. Use attachments as needed. See
ATTACHMENT USE TABLE. (page 14)
Hose
Hose
Holder
4. FOR ADDITIONAL REACH
Rotate hose
release lever
down to release
hose for
maximum hose
reach.
Hose
Release
Lever

ATTACHMENTS

When using attachments, be careful not
to overextend the stretch hose when
reaching. Trying to reach beyond the
hose stretch capability could cause the
vacuum cleaner to tip over.
DO NOT pull the vacuum cleaner
around the room by the hose. Property
damage or personal injury could result.
TELESCOPING WAND
The wand length is adjustable and requires
no assembly. To adjust, simply press button
on the wand handle and slide the upper
wand to the desired length, release button
and move inner wand in or out until it locks.
COMBINATION BRUSH
The combination brush can be attached
directly to the wand.
Use the combination brush without the
brush for greater suction on furniture
cushions or stairs.
Use combination brush with brush for
cleaning loose surfaces such as drapes.
- 13 -
CAUTION
CAUTION
Brush
Combination
Brush
Brush
Holder