I
Combination
Crevice
Toot
Handle
2. Telescopic
Wand
Extension
Extension
Release
Lever
ATTACHMENTS
TO USE ATTACHMENTS
3. Hose
Place the carpet/bare
floor selector in the
bare floor setting by rotating the selector
back and down to the bare floor seffing.
See CARPET/BARE FLOOR SELECTOR
section on page 9.
ToBareFloor
Position
I
Floor Selector
TELESCOPIC WAND WITH
SUCTION CONTROL SLIDE
1. Remove the lower end of the extension
hose from the wand holder by grasping
the hose collar, twisting, and pulling
straight up,
2. Remove the telescopic
wand from the
wand holder.
3. Remove the crevice tool from its storage
position in the wand. Rotate the locking
ring to the UNLOCK position.
,_WARNING
Electrical
Shock And
Personal
Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the vacuum
cleaner. Failure to do so could result in
electrical shock or personal injury from
vacuum cleaner suddenly starting.
I0