LG spectrum 2 Guia Del Usuario página 54

Connecting to Networks and Devices
52
To select USB mode for Autorun
1. From the Home screen, tap Apps
USB connection type.
2. Tap Media sync (MTP) or Camera (PTP) to connect to the PC for
Autorun.
Tap Charge only to use only the charging function and not the USB
function.
Tap Internet connection to use the ethernet or modem function and not
the default USB function.
NOTES USB Autorun only works with Windows
systems.
Log on to the PC as Administrator. Non-Administrator accounts have insufficient
privilege to install the USB Modem driver and don't run the Autorun feature.
Do not unplug the USB Cable during Autorun.
If Autorun doesn't function properly, the USB mode is changed to Media sync (MTP)
mode by default.
Autorun automatically installs the USB device driver for every USB mode.
Internet connection mode
Autorun may automatically use the Media sync (MTP) mode in certain
circumstances.
Autorun automatically switches to Internet connection mode if the
connection fails while syncing or connecting.
You can share your phone's internet connection with your PC using a USB
Cable. After connecting with a USB Cable, set the USB connection mode to
Internet connection. Then select either Ethernet or Modem.
Ethernet This mode changes the phone to USB tethering mode from the
PC. From the Home screen, tap Apps
> USB connection type > Internet connection > Ethernet. Return
to the Settings screen and tap More... (under the WIRELESS &
NETWORKS section) > USB tethering > Mobile Broadband Connect
checkbox.
NOTE This mode can only be used by a user registered to a tethering plan.
Modem This mode changes the phone to Modem mode from the PC.
> Settings > Connectivity >
® ®
XP, Windows Vista, and Windows
> Settings
®
7 operating
> Connectivity