Maintenance And Storage - Ribimex Ribitech RBAT20/P Manual De Instrucciones Y Mantenimiento

VI. MAINTENANCE AND STORAGE
Before any intervention on product, ensure that switch is set on the "OFF" position,
remove the battery and unplug the charger.
Reminder: Make sure to maintain the machine in good working condition, carry out regular maintenance of the machine after
each use and before storage .Any breach or default of adequate maintenance reduces the life of the machine and increases the
risk of breakdowns and accidents.
To preserve the security system throughout the life of the machine, it is important to perform maintenance and proper cleaning,
DO NOT use non-compliant replacement parts and do NOT dismantle yourself the machine or change the security features.
6.1- Cleaning
a) Clean the plastic parts with a soft and clean cloth.
Do not use aggressive cleansing agents (solvents, abrasive cleansers) or an abrasive sponge or any sharp
objects.
- Do not use any caustic chemicals to clean the plastics parts.
- Never put or immerse the product in water or any liquid, and ensure that water does not penetrate the tool or
the charger.
Never splash with water or clean with high pressure hose.
b) Clean chuck with a soft brush.
c) Clean ventilation holes with soft brush.
6.2- Storage
- Clean tool before storage.
- Keep product, user manual and accessories in the original packaging.
- It is recommended to store the product in a clean, dry location, protected from frost, and keep it out of
children's reach (e.g. lock it up).
- Do not store product in temperatures lower than 0ºC (32ºF).
- Do not place or store any object on top of the product.
6.3- Disposal
- Battery: do not throw with household rubbish or into fire or in the environment. Dispose of used battery in
provided collecting centres.
- Tool and charger: do not dispose with household garbage. Do not throw into the environment.
Dispose of the product in a collection centre for waste of electrical and electronic equipment, or a waste
drop-off centre; or seek advice from your local municipality.
- Proceed with disposal of the tool, accessories and packaging according to local regulations regarding the
protection of the environment.
6.4- Information about the guarantee
The product is guaranteed in accordance with the legislation of the country of sale.
The guarantee starts from the date of purchase (subject to proof of purchase, ie. Sales receipt with purchase
date)
The guarantee only covers defects in materials or workmanship.
Repairs (under the guarantee) can only be performed by an authorized service center.
When making a claim under the guarantee, the original sales receipt (with purchase date) must be submitted.
The guarantee does not apply in the following:
- Normal wear and tear (on the product itself or wear parts).
- Incorrect use, eg overloading of the device, use of non-approved accessories
- Abuse or damage to the product, and damage caused by external factors.
- Damage caused by non-compliance with the instructions and guidelines of the manual, e.g. connection to the
wrong power source or non-compliance with instructions for assembly or installation.
- Partially or totally disassembled device.
- Partially or fully modified device with parts not recommended by the manufacturer
Page 23 / 62