Initial Settings; Adjusting Initial Settings; Selecting The Display Language; Setting The Date - Pioneer DEH-P5150UB Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Initial Settings

Adjusting initial settings

Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Function display
! Shows the function status.
1
Press SRC and hold until the unit turns
off.
2
Press MULTI-CONTROL and hold until
the initial setting menu appears in the dis-
play.
3
Turn MULTI-CONTROL to select one of
the initial settings.
Turn MULTI-CONTROL to switch between the
functions in the following order.
Language select (language selection)—
Calendar (calendar)—Clock (clock)—FM step
(FM tuning step)—AM step (AM tuning step)
—Warning tone (warning tone)—AUX1 (aux-
iliary input 1)—AUX2 (auxiliary input 2)—
Dimmer (dimmer)—Brightness (brightness)
—S/W control (rear output and subwoofer
controller)—Mute (sound muting/attenua-
tion)—Demonstration (feature demo)—
Reverse mode (reverse mode)—Ever-scroll
(ever scroll)—BT AUDIO (Bluetooth audio)—
Pin code input (pin code input)—
BT Version info. (Bluetooth version informa-
tion)
Use the following instructions to operate each
particular setting.
# BT AUDIO, Pin code input and
BT Version info. can be selected only when Blue-
tooth adapter (e.g., CD-BTB100) is connected to
this unit.
# To cancel initial settings, press BAND/ESC.
Black plate (27,1)

Selecting the display language

For your convenience, this unit equips multi-
ple language display. You can select the lan-
guage best suited to your first language.
1
Use MULTI-CONTROL to select
Language select in the initial setting menu.
Refer to Adjusting initial settings on this page.
2
Press MULTI-CONTROL to select the lan-
guage.
Each press of MULTI-CONTROL selects lan-
guages in the following order:
English—Español—Português

Setting the date

The calendar display adjusted in this mode ap-
pears when the telephone source is selected
or sources and the feature demo are off.
1
Use MULTI-CONTROL to select Calendar
in the initial setting menu.
Refer to Adjusting initial settings on this page.
Calendar appears in the display.
2
Push MULTI-CONTROL left or right to
select the segment of the calendar display
you wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the calendar display:
Day—Month—Year
As you select segments of the calendar dis-
play the segment selected will blink.
3
Push MULTI-CONTROL up or down to
set the date.
Pushing MULTI-CONTROL up will increase
the selected day, month or year. Pushing
MULTI-CONTROL down will decrease the se-
lected day, month or year.

Setting the clock

Use these instructions to set the clock.
QRD3028-A/N
<
Section
04
27
En
>27

Publicidad

Tabla de contenido
loading

Tabla de contenido