ARIETE 909 Manual De Instrucciones página 9

Horno de pizza
Ocultar thumbs Ver también para 909:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
35.
Packaging must never be left within the reach of children since it is potentially
dangerous.
36.
To dispose of product correctly according to European Directive 2009/96/
CE, please refer to and read the provided leaflet enclosed with the product.
DO NOT THROW AWAY THESE INSTRUCTIONS
APPLIANCE DESCRIPTION (Picture 1)
A Heater
B Baking stone plate
C Appliance body
D Handles
E Power on and temperature dial
F Temperature light
G Timer dial
H Spatula
HOW TO OPERATE
WARNING:
Before use, check the baking plate is clean and free of dust streaks. If need be, clean using
a damp cloth.
While using for the first time, a very small amount of smoke may come out; this is just caused
by the warming up of some components.
- Plug in appliance.
- Switch the pizza oven on and set the required temperature level, according to your needs, using
the dial (E): The related light (F) goes on indicating starting of the pre-heating phase.
- Set baking time by rotating the timer dial (G).
- After few minutes, the light turns off and the appliance is ready for use.
- Raise then the upper part of the appliance with handles (D) and place the pizza or any other food
to be baked on the baking stone plate (B).
- Close appliance upper part.
- "Timer" sends out a signal after every baking cycle. Rotate the temperature dial (E) to "0" and
disconnect the plug from the socket.
WARNING:
THE TIMER DOES NOT SWITCH ON AND OFF THE OVEN! It is therefore important to check
the appliance after the time set has elapsed. To switch the appliance off, set the temperature
dial to "0" and unplug it.
Make sure appliance is properly closed during baking phase or that food inside isn't in con-
tact with the upper heater.
- 7 -
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido