ENGLISH
Description and use
Sila RCT 200 (hereinafter "the appliance") is a highly energy-efficient central ventilation system with heat recovery, which
can be installed horizontally in a false ceiling. The appliance is controlled by a hi-tech electronic management system and
equipped with fan units that utilise energy-saving EC brushless motors.
A heat exchanger is fitted inside the appliance to guarantee heat exchange efficiency levels of up to 92%. The device is
equipped with an automatic bypass function (to manage the free-cooling and free-heating), and incorporated antifreeze
protection.
These appliances have been designed for domestic and commercial use.
Safety
Warning:
!
this symbol indicates that care must
be taken to avoid injury to the user
• Follow the safety instructions to prevent any harm to the user.
• Do not use this appliance for purposes other than those described in this manual.
• Having removed the appliance from its packaging, make sure that it is intact and undamaged. If in doubt, consult a
professional or contact a Baxi Authorised Technical Support Centre.
• Do not leave packaging within reach of children or individuals with disabilities.
• Certain fundamental rules must be observed when using any electrical appliance:
never touch the appliance with wet or damp hands;
never touch the appliance while barefoot.
• Do not operate the appliance in the presence of flammable substances or vapours, such as alcohol, insecticides, petrol,
etc.
• If the appliance is to be disconnected from the power supply and no longer used, store it out of reach of children and
individuals with disabilities.
This appliance can be used by children aged from 8 years and above and persons with reduced
•
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made
by children without supervision.
Caution:
!
this symbol indicates that care must
be taken to avoid damaging the appliance
• Do not make modifications of any kind to this appliance.
• The maintenance instructions must be followed to ensure the appliance does not suffer damage and/or excessive wear.
• Do not expose this appliance to the elements (rain, sun, etc.).
• Do not stand objects on the appliance.
• The inside of the appliance must be cleaned only by a skilled professional.
• Regularly inspect the appliance for visible defects. If the appliance is defective in any way, do not use it, and contact a Baxi
authorised Technical Support Centre without delay.
• If the appliance does not function correctly or develops a fault, contact a Baxi authorised Technical Support Centre without
delay. Ensure that only genuine original Baxi spares are used for any repairs.
• If the power supply cable is damaged, have it replaced without delay by a Baxi authorised Technical Support Centre.
• Should the appliance be dropped or suffer heavy impact, have it checked without delay by a Baxi authorised Technical
Support Centre.
• The appliance must be installed in such a way as to ensure that under normal operating conditions, no one can come into
contact with any moving parts or live electrical components.
• Should you need to:
dismantle the appliance, using the proper tools;
remove the heat exchanger;
remove the motor module;
the appliance must first be switched off and disconnected from the electrical power supply.
• The electrical system to which the appliance is connected must conform to applicable standards.
• Connect the appliance to the electrical power supply/socket only if the rated power of the supply is compatible with the
maximum rated power of the appliance. If not, contact a professional electrician without delay.
26