Maintenance/Cleaning; Disposal - Baxi SILA RCT 200 Instrucciones De Instalación, Funcionamiento Y Mantenimiento

ENGLISH
Maintenance / cleaning
Before commencing any servicing operation, make sure that the appliance is disconnected from the electrical power supply.
Dismantling and assembly are special maintenance operations and must be entrusted to professional technicians.
Filters:
Recommended maintenance intervals:
because levels of air pollution depend typically on geographical location and are variable, the life of the filters will be
similarly variable. With this general consideration in mind, the following filter maintenance intervals are recommended:
Inspect filters: every 50/60 days;
filter replacement: after 6/24 months from the last replacement
(according to the settings made by the installer during
installation) the machine goes into "dirty filter prealarm". This
status is signalled by some slow blinks of the led. From this
point on the filters must be replaced within 2 months; at the end
of these 2 months the saturated filter alarm is enabled (the led
stays on) and the machine stops. When the error is reset (as
described in "View alarm menu" paragraph), the counter will
also be reset.
N.B. Failure to clean or replace filters can seriously affect
system efficiency, causing: - increased pressure losses in the
air circulation system and reduced airflow; - drop in system
performance and comfort levels caused by pressure losses.
N.B. Clogged air filters are the most frequent cause of the
appliance locking up.
Removing the filters HRI Flat: fig 12
Important information concerning the environmentally compatible disposal
IN CERTAIN EUROPEAN UNION COUNTRIES THIS PRODUCT DOES NOT FALL WITHIN THE REQUIREMENTS OF
THE NATIONAL LAWS IMPLEMENTING DIRECTIVE WEEE, AND IN THESE COUNTRIES THE PRODUCT IS NOT
SUBJECT TO SEPARATE DISPOSAL OPERATIONS AT THE END OF ITS WORKING LIFE.
This product conforms to EU Directive2002/96/EC.
This appliance bears the symbol of the barred waste bin. This indicates that, at the end of its useful life, it
must not be disposed of as domestic waste, but must be taken to a collection centre for waste electrical and
electronic equipment, or returned to a retailer on purchase of a replacement.
It is the user's responsibility to dispose of this appliance through the appropriate channels at the end of its
useful life. Failure to do so may incur the penalties established by laws governing waste disposal.
Proper differential collection, and the subsequent recycling, processing and environmentally compatible disposal of waste
equipment avoids unnecessary damage to the environment and possible related healthrisks, and also promotes recycling
of the materials used in the appliance.
For further information on waste collection and disposal, contact your local waste disposal service, or the shop from which
you purchased the appliance.
Manufacturers and importers fulfil their responsibilities for recycling, processing and environmentally compatible disposal
either directly or by participating in collective systems.
36
10 10
12