Kohler Sterling 7114 Serie Guía De Instalación Y Cuidado página 8

Roughing-In
6" (15.2 cm)
(Typical/Typique/Típico)
30" (76.2 cm)
14"
(35.6 cm)
D
E
A
B
2" (5.1 cm) D.
Drain/Drain/
C
Desagüe
Drain Cutout
Découpe du drain
Abertura del desagüe
60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max
Support Clip or Roofing Nail Location (5 total)
if required by local code.
Emplacement pour le clip de support ou clou
pour toiture (5 total) si requis par le code local.
Lugar para el clip de sujeción o clavo de techar
(5 en total) si lo requiere el código local.
Series
7114, 7124
A 22-1/4" (56.5 cm)
31-1/4" (79.4 cm)
B
C 3-1/2" (8.9 cm)
D 8" (20.3 cm)
E 15-1/4" (38.7 cm)
F 10" (25.4 cm)
G 73-1/4" (186.1
cm)
H 18" (45.7 cm)
I 2-7/8" (7.3 cm)
NOTICE: All dimensions are nominal. The stud opening tolerance is +1/8" (3
mm)/-0. Carefully measure your fixture before determining enclosure size. Some
shimming between the stud frame and the fixture may be required. If a firewall is
required, rough-in dimensions will have to increase according to the thickness of the
firewall material. Stud opening dimensions must be measured toward the exposed
side of the wall material. Dimensions given in the rough-in information are crucial for
proper installation. Construct the framing and plumbing accurately.
If installing this bath with a shower door, refer to the shower door manufacturer's
1065331-2-F
16"
(40.6 cm)
4"
(10.2 cm)
8"
(20.3 cm)
1-1/4"
F (3.2 cm)
G
H
7115
Standard AFD
24-1/4" (61.6 cm) 24-1/4" (61.6 cm)
33-1/4" (84.5 cm) 33-1/4" (84.5 cm)
2-1/4" (5.7 cm) 2-1/4" (5.7 cm)
10" (25.4 cm) 10" (25.4 cm)
16-1/4" (41.3 cm) 16-1/4" (41.3 cm)
9-1/4" (23.5 cm) 9-1/4" (23.5 cm)
75-1/2" (191.8 77-1/2" (196.9
cm) cm)
19" (48.3 cm) 21" (53.3 cm)
2-3/8" (6 cm) 2-3/8" (6 cm)
8
60" (152.4 cm)
E
B
F
I
7116
25-1/4" (64.1 cm)
37-1/4" (94.6 cm)
2-1/4" (5.7 cm)
11" (27.9 cm)
17-1/4" (43.8 cm)
9-1/4"(23.5 cm)
77-1/2" (196.9
cm)
21" (53.3 cm)
2-3/8" (6 cm)
Sterling