Technical Data - Vetus TANKW55 Manual De Operación

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
Tank Connections
Connect the tank up with good quality reinforced hose. Avoid
sharp kinks in the hose and ensure there is sufficient play to fol-
low the movement of the tank, from empty to full.
The reinforced hose must be of quality suitable for drinking
water and resistant to a temperature of at least 60 degrees C
(140 degrees F)and a pressure of 4 bar (4 kgf/cm
Vetus supplies a hose suitable for tap water. It is tasteless, non-
poisonous, resistant to temperatures from -5 to +65 degrees C
(+23 to 149°F) and has a working pressure of 15 bar - 16 mm
dia. (218 psi -
5
") and 8 bar - 38 mm dia. (116 psi - 1
8
Article Code:
DWHOSE16, drinking water hose, 16 mm.internal diameter, and
DWHOSE38, drinking water hose, 38 mm. internal diameter.
Fit each hose connection with a good hose clamp.
Fit filler cap A.
Install a filler hose B, 38 mm. internal diameter, between the
filler cap and the tank. Instal this hose in such a way that the
filler cap is not subject to mechanical loads and the hose can
follow the movement of the tank.
Fit the tap water supply pipe C, 16 mm.internal diameter,
between tank and pump. A non-priming pump should be lower
than, or at the same height as the underside of the tank. A self-
priming pump can be mounted at any height in relation to the
tank.

Technical Data

Type
:
TANKW55
Capacity
:
55
12.1
14.5
Dimensions
:
68 x 78
27 x 31
Height, (full)
:
25
10
Weight
:
1.4
3.1
Max. Pressure
:
Temperature range :
Material
:
*)
Nominal values are given for capacity and weight. Slight deviations are possible.
**)
A tank filled with water must not be exposed to freezing temperatures!
Connector Kit, fitting dimensions:
For filler hose
: 38 mm. diameter
For supply hose
: 16 mm. diameter
Flexible drinking water tanks 55, 70, 100, 160 and 220 litres
www.busse-yachtshop.de | info@busse-yachtshop.de
2,
28 psi).
1
")
2
TANKW70
TANKW100
70
15.4
18.5
78 x 78
79 x 100
31 x 31
31 x 39
27
11
1.5
3.3
16 kPa (0.16 bar, 2.5 psi)
–20° up to +60°C (–4° up to 140°F)
Woven polyester, coated both sides with PVC (foodstuffs quality, colour blue)
1
Filler connection
2
Supply connector
TANKW160
TANKW220
100
160
22
35.2
26.4
42.3
79 x 142
31 x 56
27
27
11
11
1.8
2.3
4
5.1
ENGLISH
A
Filler cap
B
Filler hose
C
Tap water pipe
D
Water pump
TANKW1003
220
100
48.4
22
58.1
26.4
74 x 204
117 x 149 (triangle)
29 x 80
46 x 59
27
24
11
10
3.1
2.1
6.8
4.6
**)
litres *)
Imp. gal.
US gal.
cms
inches
cms
inches
kgs *)
lbs
7
5.0202

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Tankw70Tankw100Tankw160Tankw220Tankw1003

Tabla de contenido