Maintaining And Cleaning The Safe - Dometic PREMIUM Instrucciones De Montaje Y De Uso

MDD403
Display Fault
ERROR 5 Short audible signals
sound whenever any
button is pressed.
ERROR B A code cannot be
entered.
– The master key will not
turn.
– The safe does not func-
tion (no audible signal,
no display message).
12

Maintaining and cleaning the safe

A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning as these
may damage the product.
➤ Occasionally clean the product with a damp cloth.
EN
Maintaining and cleaning the safe
Possible cause
The safe is blocked
once an incorrect
code has been
entered five times.
The safe is blocked if it
has been closed and
opened again
20 times within
10 minutes.
Wrong key
Wrong direction
The battery is low.
The batteries are not
inserted correctly.
Suggested remedy
➤ Wait for 6 minutes with-
out pressing any buttons.
The lock is no longer
disabled following this
6 minute waiting period.
➤ Following this, enter the
correct code.
➤ Open the door mechani-
cally with the master key.
➤ Wait for 6 minutes with-
out pressing any buttons.
The lock is no longer
disabled following this
6 minute waiting period.
➤ Following this, enter the
correct code.
➤ Open the door mechani-
cally with the master key.
➤ Check that the key
number is the correct
one.
➤ Turn the key 180° in a
clockwise direction.
➤ Replace the batteries.
➤ Check whether the
batteries are correctly
inserted.
27