Using The Controls 2 Speed Models; Select Water Level - Magic Chef CAV-1 Guía De Uso Y Cuidado

Using the Controls – 2 Speed Combo Models
Controls a t a glance
Dry er Exhaust tips
STEP 1

Select Water Level

Determine the selected setting based on clothes load
size. Selection should provide sufficient water to permit
clothes to circulate freely during agitation.
It may become necessary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to Reset and then
back to the desired setting.
WATER LEVEL SETTING
Mini
Low
Medium
Super
Note:
Items must circulate freely for best results.
3
Not es
LOAD SIZE
1/4 Full
1/4 – 1/2
1/2 – 3/4
3/4 – Full
STEP 2
Select Cycle and Water
Temperature
To select a cycle and water temperature, push the
control dial in (off position) and turn it to the right
(clockwise) until the pointer is at the number of
minutes and water temperature needed for the wash
load in the Regular, Wrinkle-Free Fabrics or Delicates
cycles. All rinses use cold water.
Regular Fabrics Cycle
Used to wash Cottons and heavily soiled items.
Wrinkle-Free Fabrics Cycle
Used to minimize wrinkles with a cool-down spray
rinse following the wash.
Delicates Cycle
Used for items requiring delicate wash action. The
washer will fill, then agitate and soak alternately.
Note:
In wash water temperatures below 60
detergents do not dissolve well or clean well. Care
labels define cold water as up to 85
° F,
°
F.