Dyson Supersonic HD01 Instrucciones De Seguridad página 6

6. If the supply cord is damaged,
it must be replaced or repaired
by the manufacturer, its service
agent or similarly qualified
persons in order to avoid
a hazard.
7. This machine has a non-self
resetting thermal cut out safety
device to prevent overheating.
If your machine cuts out, unplug
it from the mains supply socket
and leave to cool.
8. CAUTION: In order to avoid
a hazard due to inadvertent
resetting of the thermal cut-
out, this machine must not be
supplied through an external
switching device, such as a timer,
or connected to a circuit that
is regularly switched on and
off by the utility company, or
plugged into any socket where
the electrical supply is unstable
or likely to be turned off.
9. For additional protection, the
installation of a residual current
device (RCD) having a rated
residual operating current not
exceeding 30 mA is advisable.
Ask your installer for advice.
10. Do not use the machine for any
other purpose than drying hair.
6