Operation-Tuner - Rockford Fosgate RFX Serie Instalación Y Funcionamiento

PANEL DISPLAY
Tuner Mode:
The panel will display RADIO, the band, FM1, FM2 or AM1, and the station frequency, unless the
default has been changed to TITLE DEFAULT and a station title has been programmed in.
CD or CDX Modes
While playing a disc the panel will display CDP PLAY or CD CHANGER PLAY, the track number
and the time played, also the disc number if in CDX mode, unless the default has been changed to
TITLE DEFAULT and a disc title has been programmed in.
All Other Modes
The panel will display AUX MODE and AUX1 or AUX2, unless the default has been
changed to TITLE DEFAULT and a title has been programmed in.
PANEL DISPLAY DEFAULT
To set the default, press and hold the DISP button until the hours on the clock begin
blinking. Immediately pressing MODE button allows selection of the default Display
by toggling between Tuner frequency, or track time in CD Mode, and station or disc
name, if titled. See PROGRAMMING TITLES for information.
NOTE: A maximum total of 100 titles can be programmed into the unit.
O – T
PERATION UNER
SELECTING A BAND
Press the BAND button repeatedly to cycle through FM1, FM2, and AM. The
act of selecting the band automatically enables that band.
TUNER OPTIONS
DX and AMERICAS are the default Tuner Options settings. The bracketed
options are alternate options.
• DX [LOCAL]
• AMERICAS [EUROPE/AUST]
• PROGRAM PLAY [EJECT MUTE]
Selecting Tuner Options
See SETUP OPTIONS to change tuner options.
SELECTING A STATION
Press the UP or DN {Down} Button (
next (UP) or pervious (DOWN) station.
Press and holding either the UP or DN {Down} Button (
TUNER MANUAL mode. You can now manually search up or down at a rate of one digit per click
(pressing and holding the UP or DN {Down} Button (
PRESET BUTTONS
Each Tuner mode—FM1, FM2, and AM—has 10 presets for a total of 30 presets.
To Set a Preset Button
1. Tune the Tuner to the station you wish to program.
2. Press and hold any preset button (1 to 0) for five seconds and it will program that setting.
or ) once and the Tuner will rapidly proceed to the
or
or
O
PERATION
) for 1 second will put you into
) will allow rapid searching).
– B
ASIC
13