Basic Operation; Advanced Operation - Rockford Fosgate RFX Serie Instalación Y Funcionamiento

Ocultar thumbs Ver también para RFX Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Basic Operation

NOTE: This system will play AUDIO CDs created on a Macintosh
NOTE: This system will play CD-R and CD-RW discs.
To Play a CD
1. Press OPEN button and the Front Panel will slide open.
2. Insert a CD and the Front Panel will slide closed after 5 seconds (PANEL
AUTO).
3. CDP PLAY will auto-select and the CD will begin playing track 1
immediately.
4. Use UP or DN {Down} Button (
To Eject a Disc
1. Press the OPEN button for 1 second, "EJECT" appears on the display and
the Front Panel will slide open and eject the disc.
2. Press the OPEN button while Front Panel is open, or wait 5 seconds and the Front Panel will
auto-close (PANEL AUTO).
NOTE: If OPEN is pressed for less than 1 second while in Panel Auto mode, the Front Panel will
open and Eject will not be engaged.
Panel Display
While playing a disc the panel will display CDP PLAY or CD CHANGER PLAY, the track number
and the time played, also the disc number if in CDX mode, unless the default has been changed to
TITLE DEFAULT and a disc title has been programmed in. See PANEL DISPLAY DEFAULT in
OPERATION-BASIC.

Advanced Operation

The following also works with the optional CDX Multi-Disc Changer if it has
been installed.
NOTE: Items shown in () refer to remote control functions.
Track Selection
1. Press the UP Button (
2. Press the DN {Down} Button (
Considerations
CDP MODE: The disc will start over at track 1 again after the last track plays.
CDX MODE: When the last track number on the current disc is reached, the
next disc will load in the CD changer and begin playing track 1.
To Play Tracks at Random
1. Press the 3/RDM button to randomize the tracks on a disk. If you have
a multi-disc changer, press and hold the 3/RDM button for 1 second to
randomize the discs and tracks.
2. To cancel, press the 3/RDM button a second time.
NOTE: The panel will display RDM until the function is cancelled.
or
)to change tracks.
) to select the next track on the disc.
) to select the previous track.
O
– CD P
PERATION
Remote
ENT
MODE
LAYER
BAND
15

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Rfx9320Rfx9320gRfx9320rRfx9420Rfx9420r

Tabla de contenido