•
Select bar using the arrow keys
•
Press Enter
•
Press Exit
•
Select
•
Press Enter
•
Use
to move to the set points to change the following
parameters,
- SWITCHING OFF (SET POINT + VALUE)
- COMMAND AT THE MINIMUM SETTING (SET POINT + VALUE)
- BOILER SET POINT
- SWITCHING ON (SET POINT - VALUE)
•
Press Enter
•
Press Exit
•
Select
•
Press Enter
•
S e t
t h e
m i n .
(e.g. probe 0-16 bar 4 mA =0 / 20 mA =160)
13 / 18
0006081547_201210
twice to confirm
to return to the main screen.
to confirm.
to store the parameters.
to confirm.
a n d
m a x .
p r o b e
v a l u e s