baltur LCM 100 Guida Rapida página 38

• Set min 40, max 200
• Press Exit
• Select with
• Press Enter
• Use to move to the set points to change the following
parameters,
- SWITCHING OFF
- COMMAND AT THE MINIMUM SETTING (SET POINT + VALUE)
- BOILER MINIMUM SET POINT
- SWITCHING ON (VALUE - SET POINT)
• Press Enter
• Press Exit
• Select with
• Press Enter
• Set the boiler maximum temperature S1 max
• Press Exit
18 / 18
0006081547_201210
to store the parameters.