How To Power On; Format Memory Card - AKASO C320 Manual De Usuario

HOW TO POWER ON

① Insert the car charger into your car's cigarette lighter socket.
② Insert the USB port of the car charger into the dash cam's USB port (Charger is DC
12-24V, Out DC 5V 2A).
2
Note:
① After powering on dash cam through the car charger, the dash cam will automatically
turn on and start recording (if the card has been inserted). If want to do some settings,
please firstly stop recording by pressing "OK" button.
② Please charge for at least 30 minutes before using the built-in battery as power supply.
③ The indicator light on the left top of the screen will be stayed red when the battery is
charging; And the light stayed blue when it is fully charged .
④ The built-in battery is only ready for "parking monitor" function.
In normal use, please plug the car charger into the cigarette lighter of the car to power
the dash cam. The built-in battery is not recommended as a normal use of power
supply to the dash cam, in order to avoid the battery no power when parking, and
cause the parking monitoring function to fail.
⑤ The camera can be powered by connecting the phone adapter 5VDC with the USB
Cable to plug into a power outlet.
When charging, please shut down the camera by long press the power button.
Tips:
① Flashing blue indicator light means the camera is recording
② Red indicator light means the camera is charging.
04

FORMAT MEMORY CARD

Press to enter into the setting, press
to "Format", press
confirm and exit.
Format
Default Setting
Version
1
Format
Default Setting
Version
Note:
① All data will be deleted. Before formatting your memory card, please remember to
backup your important data on your other devices.
② Every time you insert a SD card, please format it in the camera to ensure that the SD
card is compatible with the camera well.
again to switch to
button and then press or to choose "Cancel or OK", press
All data will be
deleted
Cancel
OK
setup setting, then press
to
Setup
3/3
Setup
3/3
05