Samsung CM1929 Serie Instrucciones De Funcionamiento Con Instrucciones De Preparación página 334

When all time is elapsed, the end of cycle Beep Tone will sound 4 times and all
heating will stop.
The oven lamp will go o . For 1 min, the display shows '0' and the cooling fan
will keep working in order to cool down the interior parts. During the time, the fan
will not stop even when you open the door. 1 min later it will stop. Food may be
removed from oven whilst the fan is still running.
During the time, the fan will not stop even when you open the door. 1 min later it will
stop and "ON" appears again. Food may be removed from oven whilst the fan is still
running.
Whilst in a heating cycle, one press on CANCEL button stops the oven. At this time,
the Power Check Indicator "ON" starts blinking and goes o when the CANCEL
button or START button is pressed again.
You can restart it by pressing the START button or a second press on CANCEL
button will cancel the selected program. While NOT in a heating cycle, one tap on
CANCEL button cancels the selected program.
You can press +20sec button one or more times in order to add the cooking time
by 20 seconds. But you can not exceed the maximum time per power level allowed
for power level selected.
When you first plug in the power cord, the oven beeps once and all the indicators
show for 5 sec in the display window.
When heating cycle is completed and you open the door, the oven lamp
automatically turns on and goes o 1 min later.
When you open the door whilst in a heating cycle, the oven stops operating and the
oven lamp automatically turns on for 1 min and goes o 1 min later. If you leave the
oven door open for more than 1 min, the oven beeps once every minute and after 5
min the power source check indicator 'ON' appears in the display window.
CM1529A-1_XEU_DE68-04030B-03_EN_160629.indd 14
Multi-stage cooking
1. Select the desired power level by pressing the POWER
LEVEL SELECTOR button or DEFROST SELECTOR
button.
Result :
2. Set the desired heating time by pressing the NUMBER
buttons.
Result :
3. Repeat steps 1 and 2 for II or III stage memory
programming.
4. Press the START button.
Result :
The maximum time according to each cooking power level can be referred to in the
title "Power Levels ans Time Variations" on page 15. The NUMBER buttons will not
operate or respond when you press a cooking time exceeding the maximum value.
It is not possible to set a cooking time for longer than the maximum time allowed on
the chosen program. It is advisable to press CANCEL button and to enter a new
power level and cooking time.
You can not set up the same POWER LEVEL or DEFROST.
It operates as setting up sequence.
English - 14
The selected power level will be displayed in the
display window.
The selected time is displayed in the display
window.
The oven lamp and cooling fan will be turned
on. The oven will automatically start heating
according to pre-programed cooking time and
power level. (I stage g II stage g III stage).
The time on digital display will count down.
2016-06-29 5:31:32