How To Choose Modes - Hayward Powerline 15-81500 Manual De Instalación E Instrucciones

4. USAGE AND OPERATION
Parameter 6
System Quantity
(don't set)
Parameter 9
Pump: 0 (always open), 1 (60 second start
before compressors start; 30 second stop
after compressors stop)
4.3 How to choose Mode
4.4 How do you know what the current status are?
Water inlet temperature
Condenser temperature
Parameter 7
Save setting after
power off or not
1 (yes) 0 (No)
• Press MODE to choose mode (mode can be
changed when running)
• Press "
Defrost LED
the LED displays the water-inlet temperature,
water-outlet temperature and current mode.
Heating mode
• Elec. heating - not applicable for these
Cooling mode
models.
Water outlet temperature
Ambient temperature
Parameter 8
Mode: 0 (cooling only)
1 (cooling & heating)
2 (auxiliary elec. heating)
3 (heating only)
" to power on unit. When running,
Evaporator coil
temperature
9