Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
attempt to repair. If a repair is required,
contact a Technical Assistance Service
authorised by the manufacturer and
request the use of original spare parts.
•
If the cable for this appliance is
damaged, contact an authorised
Technical Assistance Service for it to be
replaced.
•
Do not leave the appliance exposed to
the elements (rain, sun, ice, etc.).
•
Do not use or let any part of the
appliance come into contact or near
hot surfaces (kitchen gas or electric
hobs or ovens).
•
Do not use detergents or abrasive
sponges to clean the appliance.
•
Do not touch the hot surfaces. Use the
handles.
•
Do not let the cable come into contact
with the hot parts of the appliance.
•
Do not dismantle the appliance or
attempt to repair it yourself.
•
Do not place heavy objects on the hob.
•
Do not use the hob near a source
of flammable gas or in a damp
atmosphere.
•
Do not place the hob where water or oil
could splash onto it.
•
Never leave the hob unattended while it
is functioning.
•
Open vacuum-packed foods before
heating them up on the hob.
•
Do not use unsuitable pans.
•
Do not cover the air vents or air inlets
or insert any foreign bodies into them.
•
Correctly centre the pans on the
heating area.
•
After using the hob, let it cool down
before touching it.
•
If you should notice any external
defects, disconnect the appliance to
prevent short-circuiting.
•
Do not leave any metal objects on the
hob, as they could become very hot.
•
Pacemaker wearers should consult
their doctor before using this appliance.
4. PANS
1. The pan base must be made of a
magnetic material.
2. Pans made of materials such as glass,
ceramic, aluminium, copper and other
non-magnetic substances cannot be
used.
3. The pan base must be flat, and its
diameter must be between 12 and 26
cm.
4. After switching on the hob, a beep will
sound until the pan is placed on the
cooking area.
5. If you remove the pan from the induction
hob while it is functioning, the hob
will stop heating and an intermittent
beep will sound. After one minute has
elapsed, it will switch off automatically.
5. FUNCTIONING
• Ensure the air vents and air inlets are
not blocked, and that there are no metal
objects on the hob apart from the pans.
• Stand the pan containing the food to be
heated on the central part of the vitro-
ceramic hob.
• When the hob is plugged in, a beep will
sound.
• Press the ON/OFF button to switch on
the appliance. You will hear a beep and
the pilot light (4) will start to flash.
• After selecting the functioning mode, an
intermittent beep will sound until you
place a pan on the cooking zone. This
beep will sound again each time the
pan is removed from the hob, and if one
minute elapses and no pan is placed on
it, the appliance will switch off.
• Press the function selector (8) to choose
the functioning mode. If you switch
on the hob but have not pressed the
selector button after two minutes have
elapsed, it will automatically switch off.
• The corresponding pilot light will come
on depending on the function selected:
• POWER SETTING MODE ("Power")
(11): This is for selecting a power
10
Publicidad
Tabla de contenido
