Troubleshooting - Fagor VCE-156 Manual De Instrucciones

machine or dry it with a hairdryer. The
filter must only be left to dry naturally.
7. Once the filter is dry, carefully place it
back into the container (9). Never use
the vacuum cleaner without the filter.
8. Insert the container (9) into the appliance
of the hand-held vacuum (5).

9. TROUBLESHOOTING

PROBLEM
The hand-held vacuum is
not working
The powered brush is not
working
The suction power is weak
CAREFUL: The suction hole must be open
and unobstructed at all times; otherwise,
the motor may overheat and become
damaged.
N.B.: It is advisable to change the dust
container filter every three to six months,
depending on use, to ensure maximum
performance of the appliance.
CAUSE
1. Batteries need charging
2. The contacts between the
appliance and the charger
base are dirty
3. There is no power in the
power transformer from
the electricity socket.
4. The charger is connected.
1. The vibrator is blocked
with waste or dirt
2. The belt is broken.
3. The vacuum cleaner unit is
not properly positioned.
1. The dust container is full.
2. The dust container
filter needs cleaning or
changing.
3. The appliance needs
recharging.
14
SOLUTION
1. Charge the appliance
2. Clean the dirt off the
contacts
3. Check the fuses or
switches.
4. Disconnect the charger.
1. Remove the dirt from the
vibrator. If there is any
thread or string caught up,
cut it away carefully with
scissors.
2. Call the repair centre.
3. Place the vacuum cleaner
unit properly in position.
1. Empty the dust container.
2. Remove the container filter
and check for any objects
in the air pipe to remove
them. Clean or change the
filter.
3. Charge the appliance.