Changing The Volume - Insignia NS-DV2G Guia Del Usuario

To record from an attached device:
1. Connect your Video MP3 player to the device using a standard 3.5 mm stereo cable. One
end of the cable plugs into the line out jack on your device and the other end plugs into the line
in jack on the Video MP3 player.
2. (Optional) If you would like to change the recording quality or size then select Settings from
the Main menu, Record, then select Encoder. Choose either WMA or PCM (PCM provides the
highest quality), then select the quality level of the recording.
3. Press
Use the scroll wheel to
4.
5. Press and hold
6. Press and hold
Tip
To record from a microphone, use an amplified microphone for best results.
Recording a radio broadcast
To record an FM radio broadcast:
1. Press
Use the scroll wheel to
2 .
3. Tune to the broadcast you want to record.
4. Press and hold
5. Press and hold
Note
All radio recordings use WMA 128kb/s for recording.
Listening to a recording
To listen to a recording:
1. Press
Use the scroll wheel to
2 .
Use the scroll wheel to
3 .
Use the scroll wheel to
4.
(Play/Pause). The play pop-up opens.
Use the scroll wheel to
5.
plays.

Changing the volume

To change the volume:
•
Turn the wheel to the right or left to change the volume.
file://C:\Documents and Settings\Administrator\Desktop\NS-DVxG UG US R0\NS-DV2...
(Menu). The main menu opens.
select Recording, then press
(Play/Pause) to start recording, then release the button.
(Play/Pause) to stop recording, then release the button.
(Menu). The main menu opens.
select FM Radio, then press
(Play/Pause) to start recording, then release the button.
(Play/Pause) to stop recording, then release the button.
(Menu). The main menu opens.
select Music Library, then press
select Recordings, then press
select the select the recording to listen to, then press
select Play, then press
Page 10 of 30
(Next) or (Play/Pause).
(Next) or (Play/Pause).
(Next) or (Play/Pause).
(Next) or (Play/Pause).
(Next) or (Play/Pause). The recording
(Next) or
10/10/2006