Stylies TITAN ULTRASCHALL Instrucciones De Uso página 18

5. The descaler cartridge (15) is works-fitted. Please check that it
is firmly screwed on to the tank lid (19).
To change the descaler cartridge (20), unpack a new one and
firmly screw it onto the tank lid (19).
6. The «Silver Cube» (27) is works-fitted (more details on page 18).
7. Screw the tank lid with cartridge (18) firmly onto the tank.
8. Turn the tank upside down and check for water leakage.
9. Install the tank, and you should hear a bubbling sound (water
collector filling).
10. Replace the water tank lid (2).
11. Insert the power plug (the current air humidity is displayed).
12. As soon as the water collector is completely full, the red symbol
in the display goes out. The humidifier is now ready to use.
13. The display (7) lights up when a key is pressed. After 15 seconds
it goes dark. The air humidity is also displayed when switched off
(to prevent this, pull out the power plug).
14. Press the power key
ty, and mist dispersion starts.
15. To set the humidity: first press key
midity (40-75% rel.) by repeatedly pressing the
We recommend 40- 60 %. When the display stops flashing, the
humidity setting is saved and automatically monitored. Set «Co»
for continuous operation without humidity monitoring, but this
may cause excess humidity if used too often.
16. Set the desired misting quantity: (3 stages) by repeatedly
pressing the
room.
17. Press the timer key
time: (display flashes «1H»). Adjust the shutdown time in hours
with the and
. The display flashes «2» for mist quanti-
and keys. Turn the mist outlet on top into the
to activate the automatic shutdown
keys (1-12 hours or «–-- H» for no timer).
, then set the desired hu-
and keys.
5.
«Silver Cube» 6.
7.
11.–17.
15