MOB MO9168 Manual De Instrucciones página 4

When the headset is on, insert the Line-in cable, voice prompts
"Line-in Mode". Then it plays smart device's media automatically.
1. Maximum volume warning voice prompts "du du".
2. Supports MP3, WAV, and WNA format playback.
3. Micro USB as common use charging port.
LED Indicator Light Status:
Charge
Status
Power on
Status
Power off
Status
Pairing
Status
Standby
Status
Connected
Status
Using Status
Note:
If no pairing connection after the Bluetooth headset enters the
pairing mode, please turn off the headset and try again.
Do not perform other operations when searching Bluetooth to
prevent a program error.
Please select the appropriate volume whilst in use to prevent
damage to your ears.
Please note that a good environment while using the Bluetooth
headset can avoid damage to the headset.
Please re-charge the headset after a long time of none-use.
Steady red. When fully charged, the LED
indicator light turns off.
Blue LED indicator light turns on.
LED indicator light turns off.
Blue and green LED indicator lights
rapidly alternating flash.
Blue LED indicator light turns on.
Blue LED indicator light turns on.
Bluetooth Mode, Blue LED indicator light
flashes every two seconds.
Radio Mode, Green LED indicator light
turns on.
TF Mode, Green LED indicator light
flashes every three seconds.
AUX-in Mode, the headset automatically
turns off, LED light goes out.