Basic Features
■ Dolby Digital Comp (Line / RF): This function minimizes
signal disparity between a dolby digital signal and a
voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
✎
Select Line to obtain dynamic sound, and RF
to reduce the difference between loud and soft
sounds at night time.
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
¦
Selecting the Sound Mode
When you set to Dual f-g, the current sound
mode is displayed on the screen.
Audio
Type
Mono
A2
Stereo
Stereo
Dual
Mono
Stereo
NICAM
Stereo
Dual
✎
If the stereo signal is weak and an automatic switching
occurs, then switch to the mono.
✎
Only activated in stereo sound signal.
✎
Only available when the Input source is set to TV.
18
English
DUAL
Dual f-g
Default
Mono
Automatic
change
Stereo Mono
Dual f Dual g
Dual f
Mono
Automatic
change
Mono Stereo
Mono Dual f
Dual f
Dual g
Setup Menu
¦
Setting the Time
Time
■ Clock: Setting the clock is for using various timer
features of the TV.
O
The current time will appear every time you press
the
INFO
button.
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
✎
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
✎
The antenna must be connected in order to set
the time automatically.
Clock Set: Set the Day, Month, Year, Hour and Minute
manually.
✎
Available only when Clock Mode is set to
Manual.
Time Zone (depending on the country): Select your time
zone.
✎
When Country is set to Others, you can use this
function.
✎
This function is only available when the Clock
Mode is set to Auto.
¦
Using the Sleep Timer
t
■ Sleep Timer
TV after a preset period of time. (Off, 30, 60, 90, 120,
150 and 180 minutes).
✎
To cancel Sleep Timer, select Off.
¦
Setting the On / Off Timer
■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
On Time
▲
Inactivate
▼
Off Time
Inactivate
Volume
Source
10
TV
Repeat
Sun
Once
L Move U Adjust E Enter R Return
: Automatically shuts down the
Timer 1
00
00
00
00
Antenna
Channel
ATV
1
Mon
Tue
Wed
Thu
Fri
Sat