MiLAN m 228 Guia Del Usuario página 29

•
Input Capacity
• The memory used for calculation input can hold
99 "step". Whenever you input the 99th step of any
calculation, the cursor changes from "_" to " " to let you
know memory is running low and you cannot input steps
any more. If you still need to input more, you should
divide your calculation into two or more parts.
• Making corrections during input
• Use and to move the cursor to the location you
want.
• Press to delete the number or function at the
current cursor position.
• Press to an insert cursor . Inputting
something while the insert cursor is on the display
inserts the input at the insert cursor position.
• Press, , , or returns to the normal
cursor from the insert cursor.
• Replay function
• Pressing or recalls the last calculation you
performed. You can then make any changes you want in
the calculation and re-execute it.
• Pressing does not clear Replay memory, so
you can recall the last calculation even after you press
.
• Replay memory is cleared whenever you start a new
calculation, change to another mode, or turn off power.
4