Lega Eco Vario Manual De Instrucciones página 23

By pressing key 6, the screen C (program
7 8 9 10 11
chart) will be displayed.
Box 7 shows the lid lock open or closed
status, while box 8 shows the honey
extractor status (Start, Stop or Pause).
Box 9 shows the r.p.m. in the clockwise (+)
or anti-clockwise (-) direction.
From box 10 "Offset" it is possible to
increase or decrease speed by a given
C
percentage (up to 20%). It is not possible,
however, to exceed 400 rpm.
'
Box 11 shows the time elapsed from cycle
start and the time left to cycle end.
Press the cycle start key (6) to start the honey extractor; after a few seconds the cage will start rotating. Cage
rotation can be stopped with the pause key (12) or the stop key (13). In both cases, the lid lock will only allow
lid opening after the cage has come to a stop.
In case of danger hit the emergency button (1).
After pressing the pause key, you can restart the honey extractor by pressing the key again or alternatively, by
pressing the Enter key; in the latter case, the cycle will resume from the point at which it had been stopped.
If the Stop key is pressed, the cycle will stop and a new cycle will then start.
At program completion, the half-lid can be opened and another similar work cycle can be started; or, by
holding down the Stop button, you can return to screen "A" and select a different work cycle.
4.3 (AUTOMATIC) WORK PROGRAM PERSONALISATION
Up to two new working programs can be
created.
From screen "A", go to point 9 or 10 by using
the direction arrows then confirm with key 4.
Use the direction arrows to highlight and modify
data on this page.
At completion, press the cycle start key to start
the honey extractor.
Additionally, the description of both the preset
D
and the newly created programs can be
modified.
To do this, from screen "A" use the direction
arrows or to select the program for which you would like to modify the description.
Now press the arrow for access to the description field.

Use the arrows to select the required characters.
Costruzioni Apistiche – via Maestri del Lavoro 23 – 48018 Faenza
www.legaitaly.com - Tel 054626834 – Fax 054628279 – P.iva 00043230390
23 / 75