Hydas Mini TENS Body Max Instrucciones Servicio página 26

• Batteries may not be charged, dismantled, thrown into fire or
short-circuited.
• Protect batteries from excess heat.
• Remove the batteries when not using the unit for a long time, to prevent
damage due to battery leakage.
• Always replace the full set of batteries. Do not mix old and new batteries or
batteries of different types.
c
Connect the electrode pad to device. (Fig.3)
Before proceeding to this step, be sure the device
is completely turned OFF. Connect the electrode
pad to the electrode button of stimulator correctly.
d
Place the electrode pad on skin.
Apply the electrode pad to the exact site indicated by your physician,
following the instructions included with the electrodes labeling. Before
applying the electrode pad, be sure the skin surface over which
electrode is placed is thoroughly cleaned and dried. Make sure the
electrode pad is placed firmly to the skin.
Caution!
• Do not switch the device on when the self – adhesive electrodes is not
positioned on the body
• Never remove the self- adhesive electrode pad from the skin while the
device is still turned on
• Only use the electrodes pad and lead wires that provided by the vendor.
Using other products could lead to altered biological conditions and thus
to false pulses.
e
Turn on the device
Press the [ON/SET+] button to turn on the device.
f
Select the program
Press [OFF/SET-] button to select the program (Fig.4); when the intensity
has already been set, the program can not be changed.
26
Fig. 3
Fig. 4