For Your Safety - Loewe Universal Speaker Instrucciones De Manejo

Welcome

For your safety

For your safety and to avoid unnecessary damage to your TV set, please read
and observe the following safety instructions:
• Your Individual Sound Universal Speaker loudspeakers are designed exclusive-
ly for the reproduction of audio signals.
Protect the loudspeakers from ...
• Damp and moisture
• Knocks and mechanical stresses
• Magnetic and electrical fields
• Higher electrical powers than specified
• Cold, heat, direct sunlight and extreme temperature variations
• Dust
• Covering which obstructs air circulation
• Manipulations inside the set
Do not place any containers filled with liquids or lit candles on top of the unit.
Your Individual Sound Universal Speaker loudspeakers have been designed
exclusively for private domestic use. Warranty services cover this use for the
intended purpose.
If you have moved the loudspeakers out of the cold into a warm environment,
leave them switched off for about an hour to avoid any possible formation of
condensation. Use the loudspeakers only when they have acclimatised to room
temperature. This avoids seriously damaging the components.
- 10
Setting up
Installing the loudspeakers
Basic information
• Place the loudspeakers on a stable, flat surface or use the optional Loewe
wall mountings.
• Lay the speaker cables in such a way that they cannot be damaged.
• The speakers generate magnetic dispersion fields which act in the vicinity of
the housing. We recommend a minimum distance of > 0.5 m from magneti-
cally sensitive equipment such as CRT-TV sets, magnetic data media etc.
Loudspeakers
Use the wall mountings that we can supply as accessories, or position the spea-
kers at the appropriate height on pieces of furniture or shelves.
For the best possible audio experience the loudspeakers should be installed
symmetrically with respect to your sitting position - see the pictures on the
following page.
If this should not be possible, correct the level of the loudspeakers using the
Multiroom Receiver's configuration menu.