The Led Display - LG STEAM WASHER WM2801HA Serie Guía Del Usuario E Instrucciones De Instalacion

H O W TO U S E

THE LED DISPLAY

The LED display shows the settings, estimated time remaining, options, and status messages
for your washer. When the washer is turned on, the display will illuminate.
1 CYCLE COMPLETION INDICATOR
This portion of the display shows which stage
of the wash cycle is currently underway (LOAD
SENSING, WASH, RINSE or SPIN).
At the beginning of the cycle, the washer tumbles
the load and detects the weight of the clothes.
The display will indicate the approximate load
size as the number 1 to 4 for 5seconds. (This
allows COTTON/NORMAL, ALLERGIENE
SANITARY course).This allows you to adjust the
amount of detergent and other additives for best
results and improved efficiency.
2 ESTIMATED TIME REMAINING
When the START/PAUSE button is pressed, the
washer automatically detects the wash load
(weight) and optimizes the washing time, based
on the selected cycle and options. The display
will then indicate the estimated time remaining
for the selected wash cycle.
NOTE: The cycle time displayed may appear
much longer than that of a top-loading washer.
The displayed time is for the complete cycle,
rather than just the agitation portion of the cycle,
as is typically shown on a top-loading washer.
20
1
3
4
,
TM
2
3 DOOR LOCK INDICATOR
Indicates that the door is locked. The washer
door will lock while the washer is operating. The
door can be unlocked by pressing the START/
PAUSE button to stop the washer.
NOTE: If the temperature in the washer is too
high, the door cannot be unlocked until the
washer has cooled. If the water level is too
high, select the DRAIN & SPIN cycle to drain
excess water. Do not try to force open the door.
DELAY WASH INDICATOR
4
This indicator shows that the washer has
been set for DELAY WASH. The washer will
start automatically after the set delay time
has passed.