The Led Display - LG WM3360HVCA Manual Del Propietário

H ow to use washer
The LED display shows the settings, estimated time remaining, options, and status messages for
your washer. When the washer is turned on, the display will illuminate.
1. CYCLE COMPLETION
INDICATOR
This portion of the display shows which stage of
the wash cycle is currently underway (LOAD
SENSING, WASH, RINSE or SPIN).
2. ESTIMATED TIME
REMAINING
When the START/PAUSE button is pressed, the
washer automatically detects the wash load
(weight) and optimizes the washing time, based on
the selected cycle and options. The display will
then indicate the estimated time remaining for the
selected wash cycle.
NOTE: The cycle time displayed may appear much
longer than that of a top-loading washer. The
displayed time is for the complete cycle, rather than
just the agitation portion of the cycle, as is typically
shown on a top-loading washer.

THE LED DISPLAY

3. DOOR LOCK INDICATOR
Indicates that the door is locked. The washer door
will lock while the washer is operating.
The door can be unlocked by pressing the
START/PAUSE button to stop the washer.
NOTE: If the temperature in the washer is too high,
the door cannot be unlocked until the washer has
cooled. If the water level is too high, select the
DRAIN & SPIN cycle to drain excess water.
Do not try to force open the door.
4. DELAY WASH INDICATOR
This indicator shows that the washer has been set
for DELAY WASH. The washer will start
automatically after the set delay time has passed
15