Sunbeam FlexTemp 901-825 Manual De Instrucciones página 2

IMPORTANT SAFETY INSTRUCTIONS
DO NOT DESTROY
DANGER:
TO REDUCE THE RISK OF BURNS, ELECTRIC
SHOCK AND FIRE, THIS PRODUCT MUST BE USED IN
ACCORDANCE WITH THE FOLLOWING INSTRUCTIONS:
1. READ ALL INSTRUCTIONS.
2. DO NOT USE WHILE SLEEPING.
3. DO NOT USE ON AN INFANT OR ON AN ANIMAL.
4. THIS PAD IS NOT TO BE USED ON OR BY AN INVALID,
SLEEPING, HELPLESS OR UNCONSCIOUS PERSON, A
PERSON WITH DIABETES, A PERSON WITH POOR BLOOD
CIRCULATION OR INSENSITIVITY TO HEAT, OR A PERSON
INCAPACITATED BY MEDICATION.
5. THIS APPLIANCE IS NOT TO BE USED BY CHILDREN. CLOSE
SUPERVISION IS NECESSARY WHEN ANY APPLIANCE IS
USED NEAR CHILDREN. CHILDREN SHOULD NOT PLAY WITH
THE APPLIANCE.
6. DO NOT USE ON AREAS OF INSENSITIVE SKIN.
7. BURNS CAN OCCUR REGARDLESS OF CONTROL SETTING,
CHECK SKIN UNDER PAD FREQUENTLY.
8. DO NOT USE IN AN OXYGEN ATMOSPHERE.
9. DO NOT USE PINS OR OTHER METALLIC MEANS TO FASTEN
THIS PAD IN PLACE.
FlexTemp Joint Wrap 901-825_19ESM1 (US).indd 1-2
-
-1
10. DO NOT SIT ON, AGAINST, OR CRUSH PAD – AVOID SHARP
FOLDS. PLACE PAD ON TOP OF AND NOT UNDER THE PART
OF BODY NEEDING HEAT.
11. UNPLUG WHEN NOT IN USE. NEVER LEAVE APPLIANCE
UNATTENDED, ESPECIALLY IF CHILDREN ARE PRESENT.
12. NEVER PULL THIS PAD BY THE SUPPLY CORD. DO NOT USE
THE CORD AS A HANDLE. DO NOT PINCH CORD.
13. DO NOT TUCK IN, TRAP, FOLD, CROSS, PINCH OR WRAP
CONTROL OR CORD WITH HEATING PAD DURING USE.
14. USE CAUTION WITH PAD ENDS TO PREVENT HOOK FASTENERS
FROM DAMAGING CLOTHING OR OTHER PROPERTY.
15. DO NOT PLACE ANYTHING OVER THE HEATING PAD WHILE
IN USE OR PLUGGED IN, SUCH AS A TOWEL, BLANKET,
CLOTHING, OR ANY OTHER INSULATING MATERIAL, AND
NEVER ALLOW HEATING PAD TO WRAP AROUND ITSELF.
16. CAREFULLY EXAMINE PAD, CORD AND CONTROLLER
BEFORE EACH USE. DISCARD THE PAD IF ANY SIGN OF
DETERIORATION, WEAR OR DAMAGE. DO NOT TAMPER WITH
THIS PAD IN ANY WAY. THERE ARE NO USER SERVICEABLE
PARTS. IF PAD DOES NOT FUNCTION SATISFACTORILY, SEE
WARRANTY FOR CUSTOMER CONTACT INFORMATION.
17. LOOP CORD LOOSELY WHEN STORING, TIGHT WRAPPING
MAY DAMAGE CORD AND INTERNAL PARTS. ALLOW TO
COOL BEFORE STORING AND DO NOT CREASE BY PLACING
ITEMS ON TOP OF IT. STORE IN THE ORIGINAL PACKAGING,
-2-
3/25/19 9:48 AM