Valore VS1205 Guía De Instalación Del Usuario página 10

Recommended range
area for user's height
(measured from top of
the tallest user's head)
Installation Template Guide
STEPS TO USE TEMPLATE:
• Place the template guide on the shower wall over the desired position for the shower panel.
• Have the tallest user at home stand next to the template guide against the shower wall.
• Keeping the top of the tallest user's head level within the Recommended Range Area (marked as
darkened section at 25 1/4" and 31 1/3" height on template), find the desired height level relative
to the position of the 5 holes on top of the template).
• Determine which of the five holes above the template is closest to the outlet of the existing
shower \ head with brass extender joint attached in Installation Part 3.
• Mark which hole is closest to the correct desired position and place the template against the
shower wall with shower head outlet/brass extender joint inside the hole marked.
• One the template position is selected and the shower head outlet is inside the selected hole,
double check to make sure the tallest persons' top-of-head level is still within the gray marked
area printed on the template.
English
INSTALLATION
Installation Position
1
Depending on user's height within
2
the grayed area of the Template
3
Guide, select the hole number
closest to the location of the
shower head outlet/brass
extender joint (Part 4)
10
4
4
• An Installation Template Guide
is included with your shower
panel as a convenient method
of determining the correct
position of the shower panel
and drill in screw anchors/
screws.