Okamura Choral Instrucciones De Uso página 21

GB Troubleshooting
Problem
Are you sitting on the seat
when adjusting the seat
height?
The seat cannot be lifted up.
Is the seat height in its highest
position?
Are you sitting on the front
edge of the seat?
The seat cannot be lowered.
Is the seat height in the lowest
position?
Are you sitting on the seat
The seat slide lever does not
when adjusting the seat
work.
depth?
The lever on the bottom left of
the seat is locked.
The backrest does not recline.
The reclining tension
adjustment lever is set to the
strong (back) position.
Are you using rubber casters
on a rug or carpet?
Casters do not move
smoothly.
Are they tangled with lint or
wool?
Are you using urethane
Casters are slippery. casters on hard floors such as
a plastic tile floor?
Chair makes noise. -
 Please contact an official dealer.
39
Check Solution
Adjust the seat height while
not seated on the seat.
The seat cannot be lifted up
beyond the highest position.
Sit in the center of the seat
while adjusting.
The seat cannot be lowered
beyond the lowest position.
Adjust the seat depth while
not seated on the seat.
Lift the lever to release the
lock, and then lean against
the backrest.
Turn the reclining tension
adjustment lever to the weak
(front) position.
Use urethane casters.
Remove lint or wool or replace
the casters.
Use rubber casters.
Visit a retail shop or the
nearest branch.
D
Page
16
16
16
16
17
Bauteile
18
19



Überzugmaterial

Polstermaterial
 > XX < verweist auf das Material der Teile. Diese Informationen sind nützlich für das Recycling.
 Beachten Sie bitte, dass sich die Produktspezifikationen ohne vorherige Ankündigung aufgrund von
Verbesserungen an dem Produkt ändern können.
Materialien
Teil
Rückenlehne Glasfaserverstärktes Polyamid >PA-GF<
Variante mit
Gewebe
Lendenwirbelstütze Polykarbonatharz >PC<
Rückenlehne,
Polypropylenharz >PP<
Variante mit
innere Schale
Polster
Lendenwirbelstütze Polypropylenharz >PP<
Rahmen für Rückenlehne Druckgussaluminium >ADC<
Sitz, innere Schale Recyceltes Polypropylenharz >PP<
Recyceltes glasfaserverstärktes Polyamid
Sitzrahmen
>PA-GF<
Fuß Druckgussaluminium >ADC<
Thermoplastischer Polyurethan-Kunststoff
>TPU<
Designarm
Druckgussaluminium >ADC<
Thermoplastischer Polyurethan-Kunststoff
>TPU<
Verstellbare Armlehne
Glasfaserverstärktes Polyamid >PA-GF<
Druckgussaluminium >ADC<
Polypropylenharz >PP<
Kopfstütze
Glasfaserverstärktes Polyamid >PA-GF<
Kleiderbügel Polyamidharz >PA<
Gewebe Polyester
Stoff Polyester
Rückenlehne Gegossen
Sitz Gegossen
Kopfstütze Gegossen
Materialien
40