Dometic WAECO MagicSafe MS660 Instrucciones De Montaje Y De Uso página 82

_MS660.book Seite 82 Montag, 2. August 2010 8:03 20
Programming MagicSafe
No. Software function
16 Door contact/boot input
18 Car Finder/convenience func-
tion on
19 Switch time for convenience
locking function
20 Deactivation of faulty door con-
tacts
24 Visual signals
9.2 Description of the software functions
Function 1 (Siren sound – confirmation tone when activating and
deactivating)
This function enables a siren confirmation tone when the alarm system is
activated and deactivated.
NOTE
I
By activating the acoustic confirmation tone, the alarm system no
longer conforms to regulation 95/56/EC.
The operating approval for your vehicle expires within the scope of
validity of this directive!
Function 2 (Voltage drop sensor)
This function allows the voltage drop sensor to be activated or deactivated.
The sensor reacts to a vehicle battery load of at least 12 watts and triggers
an alarm.
Function 3 (Signal duration of the door locking contacts)
In some vehicles, (for example Mercedes-Benz), an activation time of
0.7 sec. might not be sufficient to completely activate the central locking
system. In such cases, you need to set the control time to 3 sec. using this
software function.
82
"Lock" button "Unlock" button
Switch open when
the door is open when the door is
(12 volts)
Car Finder Convenience out-
25 sec. (auto)
On
Hazard light
MagicSafe MS660
Switch closed
open (0 volts)
put on
(➔ no. 8)
Manual
(➔ no. 4)
Off
Indicator