Lenze E94AZMS Serie Instrucciones Para El Montaje página 29

Installation steps
How to proceed for side-by-side mounting:
1. Hook the angle bracket
2. Mount the filter to the left of the mounting base.
– Filter turned by 90° compared to standard mounting.
– Do not screw down completely yet!
– The mounting holes do not match the typical 9400 grid hole pattern.
3. Pre-assemble further units.
4. Align all units.
5. Screw units tightly to the mounting plate.
EDK94AZMS DE/EN/FR/ES/IT 2.1
Side-by-side mounting - device sizes II and III
into the grid hole pattern of the filter .
Mechanical installation 7
SSP94NF006
29