Troubleshooting Guide - Bontempi Toy Band Star 40 2300 Instrucciones Para El Montaje Y Uso

E N G L I S H
MAINS SUPPLY
The instrument can be supplied by the AC/DC (Vdc =6V / I = 500 mA)
adapter (not supplied) conforms to national and international safety regulations covering electrical
appliances. Insert the jack in the DC socket c .
• The toy is not intended for children under 3 years old • The toy must only be used with the recommended adaptor
• The toy is to be disconnected from the adaptor before cleaning • The mains adaptor is NOT a toy.
BATTERY SUPPLY
Use a screwdriver to open the battery compartment. Insert 4 x 1.5 V batte-
ries R6/AA (not supplied), ensuring correct polarity. Re-fit battery cover.
Replace batteries when the quality of sound becomes bad. Use alkaline
batteries to obtain a longer duration.
ATTENTION - BATTERY CARE:
• Non-rechargeable batteries are NOT to be recharged. • Rechargeable batteries must be removed from the product
before being charged. • Rechargeable batteries are only to be charged under adult supervision. • Different types of
batteries or new and old batteries are not to be mixed. • Use only batteries of the same or equivalent type. • Batteries
are to be inserted with correct polarity. • Remove exhausted batteries to prevent leakage. • Do not short circuit sup-
ply terminals. • Remove batteries during long periods of non-use.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentioned here below, please refer to Council
Administration office regarding specialised waste collection centres.
1. DISPOSAL OF BATTERIES - Protect the environment by disposing of batteries in the special contai-
ners provided for this use.
2. PACKAGING DISPOSAL - Take the paper, cardboard and corrugated board to the appropriate waste collection cen-
tres. Plastic material must be placed in the relevant collection containers.
The symbols indicating the various types of plastic are:
Key for the different types of plastic materials:
PET= Polyethylene terephtalate • PE= Polyethylene, code 02 for PE-HD, 04 for PE-LD • PVC =Polyvinyl chloride • PP=
Polypropylene • PS= Polystyrene, Polystyrene foam • O= Other polymers (ABS, Laminates, etc.)
3. DISPOSING OF ELECTRICAL APPLIANCES - The wheelie bin symbol with a cross indicates that the product
must not be disposed of in the domestic waste at the end of its useful life. Instead, it should be taken to your
nearest designated collection point or recycling facility. Alternatively, check with your retailer and return
the product when buying a replacement, on a one-to-one basis or as free of charge in case the size is smal-
ler than 25cm. Appropriate disposal promotes the recycling of parts and materials, as well as helping to
protect the environment and human health. Under current legislation, strict penalties are enforced against those
disposing of products illegally. For more information about the collection of special waste, contact your Local
Authority.
TROUBLE SHOOTING GUIDE
Problem
The instrument doesn't work or
distorted sound
Microphone doesn't work
If there is an irritating whistling sound
No sound can be heard from the
external music source
ATTENTION: in the case of malfunctioning remove and re-insert the batteries
4
01 02 03
PET PE PVC
Solution
Batteries low – fit new batteries.
Batteries incorrectly fitted – check.
Turn microphone switch to ON.
Move the microphone away from the loudspeaker.
Check that the volume of the external musical.
positive central
05 06 07
PP PS O
R6/AA 1.5V R6/AA 1.5V
R6/AA 1.5V R6/AA 1.5V
R6/AA 1.5V R6/AA 1.5V
R6/AA 1.5V R6/AA 1.5V