Dd Shelf Pin - Twin Star Home 26MM2490 Manual De Instrucciones Adjunto

6. Choose desired height of Shelf (H) and place the
four Shelf Pin (DD) into same height shelf holes
inside side panels. Insert Wood Shelf (H), allow
Wood Shelf (H) to rest on the Shelf Pin (DD).
The Mantel must be level for the proper functionality
of doors and as a safety precaution. There are lev
elers located under the mantel, the height can be
increased by twisting counter-clockwise.
Hardware Used
DD
Shelf Pin
7. PLEASE READ ALL "ELECTRIC FIREPLACE
INSERT" INSTRUCTIONS PRIOR TO INSTALLING
ELECTRIC INSERT IN YOUR COMPLETED
FIREPLACE MANTEL. INSTALL THE INSERT IN
YOUR FIREPLACE CLOSE TO ITS FINAL
POSITION.
Lift insert carefully into the back of the unit and
center in the insert opening. Do not drag insert
across hearth/base (A) as it may scratch the unit.
Connect the Insert Support Bar (N) to the inside left
and right panels, using the bolt (AA) and washer
(BB) through pre-drilled holes.
MOVE YOUR COMPLETED UNIT ONLY SHORT
DISTANCES. MOVE COMPLETED UNIT WITH
GREAT CARE. IT TAKES TWO PEOPLE TO MOVE
COMPLETED UNIT INTO ITS FINAL POSITION.
Hardware Used
Bolt
AA
1/4 in. x 1-1/4 in.
Washer
BB
1/4 in. x 3/4 in.
Fig. 6
x 8
Fig. 7
Completed
Unit
x 2
x 2
6
DD
Install
Insert
From
Back
Electric
Fireplace Insert
N
AA BB
H