Alpine SEC-8063 Manual De Operación página 104

1
ACC
2
or/ou/o
EXT 2
EXT 3
104
Advanced
Operation
Tripped Sensor History
The Security Display Module can display up
to eight of the last tripped sensors. In addition
to the type of sensor, the system will also
report the time and date that the sensor was
tripped.
After disarming, turn the ignition switch to the
ON position.
If the alarm was tripped during your absence,
the system will report the last-most tripped
sensor. The sensor name, date and time will
appear in the Security Display module.
Display Pattern
After "SENSOR NAME + DATE" have been
scrolled one time, "TIME" is repeatedly
displayed for 3 seconds.
• DOOR DATE / TIME
• HOOD / TRUNK DATE / TIME
• IMPACT DATE / TIME
• RADAR DATE / TIME
• IGNITION DATE / TIME
• OP / RADAR2 DATE / TIME
If an up or down arrow exists to the right of
the tripped sensor display, other information
EXT 1
is available. The system has the capability of
VALET
displaying up to eight of the last tripped
sensors.
Press the EXT2/EXT3 or EXT1/VALET
button to change the Trip information display.
EXT2/EXT3 button: DOWN
EXT1/VALET button: UP
English