Electrical Wiring - Vimar SL230.T Manual De Instrucciones Para La Conexión Y El Uso

SL230.T - SL230.T.120

6. Electrical wiring.

Description of terminals:
Terminal block M1
Terminal number Board marking
1
2
3
4
5
6
7
8
9
10
11
12
13
Terminal block M2
14
15
16
17
18
19
20
21
The sum of the absorptions of the 24VDC accessories must not exceed 300 mA
Wiring for power supply line, flashing lamp and electric motor:
Description
P.IN Input (N.C.) for opening and closing safety devices
SEQ Push button (N.O.) for opening and closing (sequential or start)
STOP Push button (N.C.) for stop
PED Push button (N.O.) for pedestrian opening
SCL Input (N.C.) for closing safety devices (reopening)
SOP Programmable input for non resistive (N.C.) or resistive 8K2 sensitive edge
LSC Input (N.C.) for left limit switch (activated with right-hand cam)
LSO Input (N.C.) for right limit switch (activated with left-hand cam)
COM Common inputs and indicator light (negative)
+AS Positive for 24 VDC accessories power supply
-AS Negative for 24 VDC accessories power supply
+P.OUT 24VDC positive programmable output for safety test or 2
+WL Positive for indicator light 24V, 2W max
MOP Motor opening direction output
MCL Motor closing direction output
MCOM Common motor winding output
FL Flashing lamp 230/120 V
FL Flashing lamp 230/120 V
N Input for 230/120 V 50 Hz line (NEUTRAL)
L Input for 230/120 V
Input for earth connection
COMMON
(momentary stop)
50 Hz 25 W max (NEUTRAL)
50 Hz 25 W max (PHASE)
50 Hz line (PHASE)
230 VAC
230/120 VAC
EN
radio channel
nd
EARTH
17