WATER TREATMENT KIT
The automatic water treatment kit is comprised of an electronic unit, a control panel, a
dosing pump , an electrolysis cell and pH and ORP probes.
The electrolysis cell and the dosing pump respectively dose the active chlorine and the
acid for pH control. The two probes measure the immediate value. The whole unit is
controlled by system electronics.
The control panel is instead a connected unit separated from the electronic one which
can therefore be placed in a position easy to be checked, both in case of an immediate
control of water parameters and their modification.
Dosing pump
pH-minus
tank
AUTOMATIC WATER TREATMENT KIT
Electronics
Electrolyte cell
Water treatment kit layout
Control panel
ORP probe
pH probe
Inlet
EN
pH-minus
injector
Outlet
27