Media Panel - ION Total PA Supreme Guia Del Usuario

16. Clip LED: This LED will flash red if the signal from the inputs or media panel source is clipping. If this
happens, decrease the setting of the Mic Input Volume buttons, Aux Input Volume buttons, or Master
Volume knob.
17. Link Button: Press this button to link your speaker to another Total PA Supreme. See
Linking Two Speakers
18. Light Mode Button: Press this button to toggle between five modes for the lights on the front panel:
•
Color Wheel: The lights spin on and around the woofer.
•
Color Wheel Beat Sync: The lights spin on and around the woofer according to the tempo of the
music playing.
•
Color Cycle: The lights steadily cycle th rough different colors.
•
Beat Sync: The lights flash and change colors according to the tempo of the music playing.
•
Off: The lights turn off.
19. Power Cable Input (IEC): Insert the
included power cable here to power
the unit.
20. Fuse Holder: If the unit's fuse is
broken, remove the Fuse Holder and
replace the broken fuse with one that
has the correct rating (as indicated on
the Fuse Holder). Using a fuse with an
incorrect rating can damage the unit
and/or fuse.
21. Power Switch:
Supreme on or off.

Media Panel

Media Panel Functions:
MODE Mode: Switches the audio source between USB/SD, FM radio, and Bluetooth.
Note: A USB drive or SD card must contain playable files in order for its data to appear properly in
the Media panel's display.
Play/Pause: When USB/SD or Bluetooth is selected as the audio source, plays/pauses audio.
When FM radio is selected as the audio source, press and hold this button for 2 seconds to begin
the preset auto-store function. This jumps to the lowest station (87.5) and then travels through the
bandwidth to auto-store the strongest stations as presets.
Note: Files are played from the USB or SD source first by alphabetical order of what is on the root
level, then alphabetical by folder, and then alphabetical by the track name.
Repeat: Cycles through four options: repeat all of the tracks (ALL), repeat all of the tracks in the
folder (FOLd), repeat the current playing USB or SD track (OnE), or shuffle the track order (rAn).
Previous: Plays the previous USB, SD, or Bluetooth track. When listening to the FM radio, press
the button once to skip back through the FM stations and hold the button down to seek back
through the channel presets.
Next: Plays the next USB, SD, or Bluetooth track. When listening to the FM radio, press the button
once to tune the radio down one preset and hold the button down to seek forward through the
channel presets.
Note: In some apps, pressing the Previous (
or music genre.
6
for more information.
Turns Total PA
) or Next ( ) buttons may go to another playlist
Operation >