Beper 40.451 Manual De Instrucciones página 10

Plancha para eliminar las puntas abiertas
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
Split end hair trimmer Use instructions
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly flammable mate-
rials, gases, burning flames, heaters.
Do not allow children, disabled people or every people without expe-
rience or technical ability to use the appliance if they are not properly
watched over. Close supervision is necessary when any appliance
used by or near children.
Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unservice-
able by simply cutting the supply cable after disconnecting the plug
from the socket.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
DESCRIPTION OF THE PRODUCT: FIG.1
1. POWER SUPPLY PLUG IN
2. BATTERY HANDLE
3. NO-SLIP RUBBER GRIPS
4. PRESSING HANDLE
5. DIRECTIONAL SWITCH
6. LOCK ON/OFF
7. HAIR CHAMBER
8. HAIR PLATE
9. TRANSPARENT WINDOW
10. HAIR PLATE CENTRAL GUIDE
11. BLADES
12. HAIR PLATE LATERAL GUIDE
13. SPACER
BEFORE USE:
DETACHMENT AND INSTALLATION OF THE RECHARGABLE BATTERY : FIG. 3
Hold the hair trimmer with one hand and the middle section of the main unit while holding the battery handle
with the other.
Rotate and twist gently the battery handle counterclockwise to detach the battery, and clockwise to install again .
SPACER INSTALLATION: FIG. 4
Select the spacer to be used.
Insert the spacer into the front housing channel. Pay attention not to press the terminal parts of the spacer..
Looking at the product on its front the description (1/4 "- 1/8") should be read correctly (not upside down.
Insert the spacer all the way to the end of the front housing. It should enter nice and easy without any effort.
WARNING: DO NOT USE THE HAIR TRIMMER WITHOUT SPACERS!
ACCESSORI INCLUSI: FIG. 2 (A-G)
A. STYLING COMB
B. CLIPS
C. CLEANING BRUSH
D. TRIM SPACER (1/8" = 6,30mm E ¼"= 7,90mm)
E. POWER ADAPTOR 110-240V
F. CARRYING BAG
G. OIL
10

Publicidad

Tabla de contenido
loading

Tabla de contenido