Components; Warnings - Sagola 3900 PLUS Manual De Instrucciones

1 Air valve
2 Air inlet
3 Trigger
4 Aluminum body
5 Aluminum front
6 Plastic front
7 Plunger
6
Before putting the unit into operation, and
especially after each cleaning and/or repair
operation, a check must be made that the gun
components are securely tightened and that
the air and the air hoses are airtight (no air
leaks). Faulty parts must be replaced or repaired
as appropriate.
The gun is easy to handle thanks to its design
and the simplicity of its mechanisms. No special
training is required for handling the gun. Use
the gun according to the operating, maintenance
and safety instructions indicated in this manual
and follow the application methods indicated to
obtain the required quality of finish.
· Before putting the unit into operation, we
recommend you to clean the gun as this has
been subjected to functional tests and before
packaging it is treated internally with a protective
coating, some of which may still remain. Apply
thinner to eliminate this. Remove any residual
Grease applied during assembly.
The gun has been designed for long service
and can be used with the majority of the
products available on the market.
· Read and apply all the information, instructions
and safety measures indicated by the
manufacturer of the products to be applied

4. COMPONENTS

5
3

5. WARNINGS

(thinners, etc.) as these may provoke chemical
reactions, fires and/or explosions, or be toxic,
irritant or harmful and in all cases dangerous
for the health and personal safety of the user
and of other persons nearby (see chapter on
Safety and Health).
- Always disconnect the airline before
changing the cartridge or sachet.
- Remove any unwanted material residue
from the applicator, using a soft cloth and
solvent recommended by the material
supplier.
- Always wear safety glasses while operating
this product and follow the material suppliers
usage instructions.
Control the application rate in order to apply the
appropriate amount of product.
- 15 -
4
- Never operate the applicator witha
missing or loose front cap.
7
1
2