Descargar Imprimir esta página

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
7.2 Sachet preparation (3900 PLUS M)
1. Cut the tip off the
sachet with a
scissors.
2. Remove the front
cover from the
sealing gun.
3. insert the nozzle
for the sachet.
.
In order to carry out maintenance, repairs or
cleaning, first disconnect the unit from the
compressed air distribution network.
Do not apply excessive force or inadequate
tools for maintaining and cleaning the unit.
Some repairs must be done with special tools
on some occasions.
In these cases, you must contact the Customer
Service of SAGOLA. Any handling of this
product by non-authorised personnel would
render the warranty null and void.
The unit must be overhauled on a periodic
basis to check the status of its components
and replace these when they are not in perfect
condition.
4. Place the sachet in
the chamber of the
sealing gun and
insert the nozzle into
the cover.
5. Replace the front
cover and ensure it is
firmly secured to the
chamber.

8. MAINTENANCE

IN ORDER TO OBTAIN THE BEST
POSSIBLE RESULTS, ALWAYS USE
ORIGINAL SPARES. ENSURE TOTAL
INTERCHANGEABILITY, SAFETY AND
OPERATION..
Grease the threads and friction areas using
light oil SAE 10.
- 17 -

Publicidad

loading

Este manual también es adecuado para:

3900 plusm